Autorobot Finland Oy

» Back

Archive

2008-06-19New product launches in Automechanika Frankfurt Tapahtuma

Autorobot Finland Oy will participate to the Automechanika trade show in Frankfurt, Germany in September 16-21. Autorobot is known of its innovations and has more than 60 international patens in the collision repair industry. In Automechanika 2008 Autorobot will introduce again several exiting products including electronic portable measuring instrument EzCalipre and new multipurpose frame rack/vehicle lift.

The novelties can be seen in hall 9.0 stand number E90.

2008-06-19New CNC machinery for Autorobot Tiedote

Autorobot Finland Oy continues investing in state-of-the-art CNC machinery
as planned. The newest investmet ensures the increasing production capacity
and demand to launch new product innovations to the global market place.

2008-02-27Autorobot’s new revolutionary electronic measuring tram gauge – EzCalipre Uutinen

Autorobot introduces totally new type of hand held, all electronic wireless tram gauge. The EzCalipre gives the best value for money measuring equipment for the body shops and insurance companies. Using the light hand held EzCalipre is quick and easy for fast and millimetre accurate vehicle measuring anywhere.

2008-01-28Automässan Trade Show in Gothenburg, Sweden Tapahtuma

Autorobot Finland Oy presented, through distributor Boier Bilverktyg, novelties in Automässan Trade Show in Gothenburg, Sweden

2007-12-20Autorobot in the Walk of Fame in Hollywood, California Tiedote

Network Auto Body Inc. has been proudly serving the greater Los Angeles area, Hollywood, Bel Air, Beverly Hills, West Hollywood, Santa Monica and the San Fernando Valley since 1985. The prime location between Sunset and Hollywood Boulevards shows that the business is booming.

2007-07-06Midsummer visitors in Autorobot Tapahtuma

2007-06-18Article: STRAIGHT to the BOTTOM LINE Uutinen

The push to get vehicles through the pipeline faster has led to changes that make frame machines more versatile and cost-effective for today's collision repairers...

2007-01-25Appointment Tiedote

Mr. Tuomo Lehtovirta, M.Sc. (Engineering), MBA, has been appointed Marketing and Sales Director at Autorobot Finland Oy from 1st Jan 2007. Tuomo has also been appointed a member of the company management board.

2007-01-21Autorobot Finland Oy is partnering with Power-Tec Limited in UK Tiedote

Autorobot Finland Oy offers innovative vehicle straightening solutions to the United Kingdom market through Power-Tec Limited. The product offerings include entire range of Autorobot branded straightening benches and measuring solutions. The product line includes RoBo bench, which is the quick bench without compromises. Few minutes training and the staff is ready to use it.

2006-12-15Autorobot Finland Oy has partnered with Pegasus Makina in Turkiye Tiedote

Pegasus Makina is leading sales and service provider in Turkiye having nationwide coverage. Partnership between Autorobot and Pegasus Makina follows the Autorobot “think globally, act locally” policy. Using Pegasus Makina’s services the Turkish customers can enjoy unbeatable service in Turkiye including demonstrations, training facilities and state-of-the-art car body shop knowledge.

2006-12-12New Autorobot Center in Netherlands Tiedote

The long time Autorobot partner, Saarloos Automotive Equipment BV, has moved the Autorobot Center of Excellence to a new location in Venray, Ambachtstraat 46, NL-5804 CD Venray.

2006-09-30New sales personnel Tiedote

Mr Tuomo Lehtovirta has started in Autorobot Finland Oy as Area Export Manager for North America, Central and South America, West Europe and the African countries.

2006-09-12New Multi-purpose chassis fastener Uutinen

Autorobot Finland Oy has developed a vehicle chassis fastener working with a new locking method. MB, BMW, Audi and other vehicle types with frame can be fastened quicker in the bench with the new fastener.

2006-09-12Multi-purpose straightening bench for repair of small and medium damage Uutinen

Autorobot Finland Oy has developed a straightening bench that works in small space, the Autorobot Micro B. The Micro B is meant for the repair of small to medium size collision damage.

2006-09-11Better car body repair quality with new 3D measuring Uutinen

As a result of long research and development work, Autorobot Finland Oy now offers you a 3D measuring system designed for measuring of both car chassis and body with equal accuracy.

2006-09-11New radio control technique Uutinen

A new wireless Autorobot B20 with radio control is designed for making the car body repair quicker and easier. Additionally, another objective of this development was to take the car body straightening to a whole new technical level that will encourage also the next generation to the car body repair branch.

2003-02-24Autorobot B20 – new technology for car body repair Uutinen

Autorobot Finland has developed a new straightening bench for the new, strong cars. The straightening bench has a hydraulic straightening table with a pulling tower that operates with new pull/push technique. The most significant advantages of the hydraulic straightening table are the quick adjustment of the chassis fasteners lengthwise, hydraulic transfer of the straightening tower to the target and extending the straightening table so that the same double acting cylinder will work in straightening after the bench has been adjusted. The new pull/push technique speeds up the straightening process and provides a possibility to repair the strong body structures economically.

2002-09-13Autorobot Datasheet manager -application Uutinen

Autorobot Finland Oy has developed a new software called Datasheet Manager to make the use of Autorobot Datasheet Service easier than before. Datasheet Manager is easy to use and it speeds up the car data sheet update process because of it's automated update processes. The automated processes handles downloading of the data sheets and measuring data. In addition to data sheet updating it is possible to view and print data sheets that are installed into system.

2002-08-16Autorobot Panel Puller Uutinen

Autorobot Panel Puller makes the straightening of vehicle panels even faster and more economical. The special features of Autorobot Panel Puller are easy use and high pulling force, which can be achieved with use of the lever handles, making the equipment suitable for almost all kinds of car body straightening.

2002-01-15Frame Fastener 669B-51C for cross-country vehicles, Uutinen

The new chain fastener clamps the monocoque frame section, and
presses it slightly inwards (Picture A, Point 3).
With the traditional frame type vehicles a chain is fastened additionally
around the frame beam to support the clamp (Picture B). The special feature
of this new equipment is that it enables a grip of the car body by
tightening the screw 1 (Picture B, Point 2) while the same movement
simultaneously tightens the chain (4) around the frame structure.
The chain fastener is installed to the basic Starblock arm (5) where the
height can be adjusted with spacers (6) for different car bodies.
Patented.

2002-01-13Straightening set for chassis and body Uutinen

Autorobot Finland Oy has developed a multipurpose straightening set for chassis and body. The straightening set includes a straightening arm with a round case in which the straightening tools are installed according to the damaged part.

2001-01-18Autorobot StarPull set Uutinen

Autorobot StarPull straightening set is a combination of modern accessories that has been planned for the new vehicle structures. The straightening arm, which can be adjusted 360°, forms the base for the system. The arm turns around enabling ideal pulling directions. Depending on the repair situation, the user can choose from a range of accessories for the straightening arm, like the various specially designed fasteners for the McPherson upper end, equipment for the control arm mounting lugs, straightening angle for the box sections and casings, and a large aluminum plate for pulling the vehicle pillars made of high strength steel or aluminum.

2000-02-14Double gripper for straightening strong body structures Uutinen

The multi-purpose double gripper, developed by Autorobot Finland Oy, represents new straightening technology. It has been designed for straightening current, strong body structures. The double gripper has a wide contact surface which is necessary when straightening high tensile steels and aluminum structured car bodies.

Looking for previous news?

Autorobot Finland Oy

Archive